Authors Index


 

 

A

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Aarnio, P.
 
Automatic Generation of a Lifecycle Analysis Model from a First Principles Industrial Process Simulation Model [Program→]
 

Abbaszadeh, M.
 
Condition monitoring of wind-power units using the Derivative-free nonlinear Kalman Filter [Program→]
 

Abrishambaf, O.
 
SCADA Office Building Implementation in the Context of an Aggregator [Program→]
 
Electric Water Heater Modelling for Direct Load Control Demand Response [Program→]
 

Afonso, J.
 
Innovative Off-Board EV Home Charging Station as a Smart Home Enabler: Present and Proposed Perspectives [Program→]
 
Selective Harmonic Measurement and Compensation Using Smart Inverters in a Microgrid with Distributed Generation [Program→]
 

Afonso, J.
 
Innovative Off-Board EV Home Charging Station as a Smart Home Enabler: Present and Proposed Perspectives [Program→]
 
Selective Harmonic Measurement and Compensation Using Smart Inverters in a Microgrid with Distributed Generation [Program→]
 

Afshari, A.
 
IT Project manager selection review [Program→]
 

Ahamd, M.
 
Optimizing the Scheduling of Autonomous Guided Vehicle in a Manufacturing Process [Program→]
 

Ahmad, B.
 
Automatic Data Representation Analysis for Reconfigurable Systems Integration [Program→]
 
Optimizing the Scheduling of Autonomous Guided Vehicle in a Manufacturing Process [Program→]
 

Ahmadifar, A.
 
SGAM-based comparative study of interoperability challenges in European flexibility demonstrators: methodology and results [Program→]
 

Ahmed, T.
 
Electric Water Heater Modelling for Direct Load Control Demand Response [Program→]
 

Aksjonov, A.
 
Improving energy recovery in blended antilock braking systems of electric vehicles [Program→]
 
An Enhancement of the Driver Distraction Detection and Evaluation Method Based on Computational Intelligence Algorithms [Program→]
 

Al Khafaf, N.
 
Demand Response Planning Tool using Markov Decision Process [Program→]
 

Albano, M.
 
Towards a Framework for Interoperable and Interconnected CPS-populated Systems for Proactive Maintenance [Program→]
 

Aleotti, J.
 
Visualization of AGV in Virtual Reality and Collision Detection with Large Scale Point Clouds [Program→]
 

Almeida, L.
 
Hardware/Software Implementation Factors Influencing Ethernet Latency [Program→]
 

Alonso-Rosa, M.
 
An IoT Low-Cost Voltage Sag Detector [Program→]
 

Ambrosio, S.
 
Self-Powered Smart Sensors in the Management of Water Infrastructures [Program→]
 

Amihai, I.
 
Modeling Machine Health Using Gated Recurrent Units with Entity Embeddings and K-Means Clustering [Program→]
 

An, B.
 
A novel observer method for Markov jump systems with simultaneous sensor and actuator faults [Program→]
 

Andrade, A.
 
Data-Based Cluster-Tree Formation Scheme for Large-Scale Wireless Sensor Networks [Program→]
 

Angione, G.
 
Smart Inspection Tools Combining Multi-Agent Systems and Advanced Quality Control [Program→]
 

Aparicio Rivera, J.
 
Heapless: Dynamic Data Structures without Dynamic Heap Allocator for Rust [Program→]
 

Aparicius, J.
 
No Panic! Verification of Rust Programs by Symbolic Execution [Program→]
 

Araújo, R.
 
Mixture of Elastic Net Experts and its application to a Polymerization Batch Process [Program→]
 

Araújo, S.
 
A mind-mapping front-end for text writing [Program→]
 

Argandoña, J.
 
Data-driven Exploration and Process Optimization for a Milling-boring Machine [Program→]
 

Armentia, A.
 
A Tool Suite for Automatic Generation of Modular Machine Automation Projects [Program→]
 
Supporting Product Oriented Manufacturing: a Model Driven and Agent based Approach [Program→]
 

Arrais, R.
 
Bridging Automation and Robotics: an Interprocess Communication between IEC 61131-3 and ROS [Program→]
 

Arévalo, F.
 
Development of a Mobile App for Fault Detection Assessment based on Information Fusion [Program→]
 
A Cloud-based Architecture for Condition Monitoring based on Machine Learning [Program→]
 

Atmojo, U.
 
A Review on Programming Approaches for Dynamic Industrial Cyber Physical Systems [Program→]
 

 

B

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Bachelier, O.
 
A multi-function hybrid inverter for optimal performance in multi-source renewable energy [Program→]
 

Baghaee, H.
 
Robust Probabilistic Load Flow in Microgrids considering Wind Generation, Photovoltaics and Plug-in Hybrid Electric Vehicles [Program→]
 

Bajramovic, E.
 
Overview of authentication and access control methods for I&C systems [Program→]
 

Banerjee, P.
 
Extra-Functional Properties Driven Component Selection for Component based System [Program→]
 

Banjo, O.
 
A Genetic Algorithm Optimiser For Dynamic Product Routing In Agile Manufacturing Environment [Program→]
 

Barata, J.
 
Towards a Framework for Interoperable and Interconnected CPS-populated Systems for Proactive Maintenance [Program→]
 
GO0D MAN Data Model - Interoperability in Multistage Zero Defect Manufacturing [Program→]
 

Barbosa, J.
 
Data Scientist under the Da.Re Perspective: Analysis of Training Offers, Skills and Challenges [Program→]
 
Smart Inspection Tools Combining Multi-Agent Systems and Advanced Quality Control [Program→]
 
Implementation of a Multi-Agent System to Support ZDM Strategies in Multi-Stage Environments [Program→]
 
Performance Assessment of the Integration between Industrial Agents and Low-level Automation Functions [Program→]
 

Barddal, J.
 
Are fintechs really a hype? A machine learning-based polarity analysis of Brazilian posts on social media [Program→]
 

Baron, L.
 
Integrating Explicit Context Conditions into Model Transformations for User Interfaces [Program→]
 

Barros, A.
 
Conceptual framework for the identification of influential contexts of the adoption decision [Program→]
 

Bartels, J.
 
Tool Wear and Surface Quality Monitoring Using High Frequency CNC Machine Tool Current Signature [Program→]
 

Bauer, B.
 
Automated Generation of a Co-Simulation-based Testing Environment for Fast-Evolving Industrial Embedded Software [Program→]
 

Belhadj, J.
 
Optimal sizing and technical evaluation of energy and water system based on micro-hydric solar and wind sources [Program→]
 

Beltran, C.
 
MPC Under IEC-61499 Using Low-Cost Devices for Oil Pipeline System [Program→]
 

Benedikt, M.
 
Master for Simulation Control using the Distributed Co-Simulation Protocol [Program→]
 

Benyoucef, L.
 
A hybrid multi-objective based approach for sustainable process plan generation in a reconfigurable manufacturing environment [Program→]
 

Bergs, C.
 
Hybrid modeling approaches with a view to model output prediction for industrial applications [Program→]
 

Berthomé, F.
 
SGAM-based comparative study of interoperability challenges in European flexibility demonstrators: methodology and results [Program→]
 

Beruvides, G.
 
Towards the Adoption of Cyber-Physical Systems of Systems Paradigm in Smart Manufacturing Environments [Program→]
 

Biendarra, A.
 
Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation [Program→]
 

Bispo, K.
 
A non-intrusive approach for smart power meter [Program→]
 

Block, D.
 
Multi-Label Wireless Interference Classification with Convolutional Neural Networks [Program→]
 

Bonci, A.
 
A Review of Recursive Holarchies for Viable Systems in CPSs [Program→]
 

Bonifacio, J.
 
Self-Powered Smart Sensors in the Management of Water Infrastructures [Program→]
 

Borkowski, M.
 
Process Simulation for Machine Reservation in Cloud Manufacturing [Program→]
 

Braga, L.
 
Employment and Education in Industry 4.0 and an Analysis of the Brazilian Scenario [Program→]
 

Braune, A.
 
Integrating Explicit Context Conditions into Model Transformations for User Interfaces [Program→]
 

Buele, J.
 
MPC Under IEC-61499 Using Low-Cost Devices for Oil Pipeline System [Program→]
 

Busawon, K.
 
Modelling and Synchronization of Pulse-Coupled Non-identical Oscillators for Wireless Sensor Networks [Program→]
 

Buzhinsky, I.
 
Counterexample visualization and explanation for function block diagrams [Program→]
 

Böhm, T.
 
Deriving a State Model of a Control Program by Symbolic Execution [Program→]
 

Büth, L.
 
Supporting SMEs towards adopting mixed reality A training concept to bring the virtuality-reality continuum into application [Program→]
 

 

C

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Cagnin, R.
 
A multi-agent system approach for management of Industrial IoT devices in manufacturing processes [Program→]
 

Canete, E.
 
An IoT Low-Cost Voltage Sag Detector [Program→]
 

Carbonari, A.
 
A Review of Recursive Holarchies for Viable Systems in CPSs [Program→]
 

Carral Couce, L.
 
Expert system of winch in oceanographic vessels for scientific purposes [Program→]
 

Carratù, M.
 
Smart Power Meter for the IoT [Program→]
 
Measuring suspension velocity from acceleration integration [Program→]
 

Casagrande, R.
 
Interference of IEEE 802.11n Networks upon IEEE 802.15.4-Based WBANs: An Experimental Study [Program→]
 

Castaño, F.
 
Towards the Adoption of Cyber-Physical Systems of Systems Paradigm in Smart Manufacturing Environments [Program→]
 

Castellanos, E.
 
MPC Under IEC-61499 Using Low-Cost Devices for Oil Pipeline System [Program→]
 

Castellini, P.
 
Smart measurement systems for Zero-Defect Manufacturing [Program→]
 

Castro, R.
 
A mind-mapping front-end for text writing [Program→]
 

Catalão, J.
 
Robust Probabilistic Load Flow in Microgrids considering Wind Generation, Photovoltaics and Plug-in Hybrid Electric Vehicles [Program→]
 

Catalão, J.
 
Consensus-Based Demand-Side Participation in Smart Microgrid Emergency Operation [Program→]
 
Optimizing Nodal Demand Response in the Day-Ahead Electricity Market within a Smart Grid Infrastructure [Program→]
 

Cenedese, A.
 
An Innovative Algorithmic Safety Strategy for Networked Electrical Drive Systems [Program→]
 

Cha, S.
 
Preventing Technical Debt for Automated Production System Maintenance using Systematic Change Effort Estimation with Considering Contingent Cost [Program→]
 

Chen, J.
 
Battery charging and discharging curve feature extraction based on the best u-shapelets [Program→]
 

Chen, Y.
 
Deadline-aware Memory Scheduler and Governor for Heterogeneous Processors [Program→]
 

Cherif, H.
 
Optimal sizing and technical evaluation of energy and water system based on micro-hydric solar and wind sources [Program→]
 

Chiariotti, P.
 
Smart measurement systems for Zero-Defect Manufacturing [Program→]
 

Chioua, M.
 
Modeling Machine Health Using Gated Recurrent Units with Entity Embeddings and K-Means Clustering [Program→]
 

Chivilikhin, D.
 
Active learning of formal plant models for cyber-physical systems [Program→]
 

Clarke, M.
 
A digital twin for composite parts manufacturing [Program→]
 

Coelho, J.
 
Implementation of a Multi-Agent System to Support ZDM Strategies in Multi-Stage Environments [Program→]
 

Colombo, A.
 
Optimizing the Scheduling of Autonomous Guided Vehicle in a Manufacturing Process [Program→]
 

Conceição, A.
 
NMPC-based Visual Leader-Follower Formation Control for Wheeled Mobile Robots [Program→]
 

Concettoni, E.
 
Smart measurement systems for Zero-Defect Manufacturing [Program→]
 

Correia-Simões, A.
 
Conceptual framework for the identification of influential contexts of the adoption decision [Program→]
 

Corrêa, T.
 
Hardware/Software Implementation Factors Influencing Ethernet Latency [Program→]
 

Costa, D.
 
On the Computing of Area Coverage by Visual Sensor Networks: Assessing Performance of Approximate and Precise Algorithms [Program→]
 

Cristalli, C.
 
Smart measurement systems for Zero-Defect Manufacturing [Program→]
 

Cucchiarelli, A.
 
A Review of Recursive Holarchies for Viable Systems in CPSs [Program→]
 

Cun, X.
 
Load Forecasting Based on Deep Long Short-term Memory with Consideration of Costing correlated Factor [Program→]
 

Cupelli, M.
 
Combining auto-regression with exogenous variables in sequence-to-sequence recurrent neural networks for short-term load forecasting [Program→]
 
A Novel Approach to DG Curtailment in Rural Distribution Networks - A Case Study of the Avacon Grid as Part of the InterFlex Field Trial [Program→]
 
SGAM-based comparative study of interoperability challenges in European flexibility demonstrators: methodology and results [Program→]
 

Curto Diego, B.
 
A digitalization strategy for quality control in food industry based on Artificial Intelligence techniques [Program→]
 

 

D

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Dahane, M.
 
A hybrid multi-objective based approach for sustainable process plan generation in a reconfigurable manufacturing environment [Program→]
 

Dai, W.
 
A Cloud-Based Training and Evaluation System for Facial Paralysis Rehabilitation [Program→]
 
Modelling Industrial Cyber-Physical Systems using IEC 61499 and OPC UA [Program→]
 

Dai, X.
 
Modelling and Synchronization of Pulse-Coupled Non-identical Oscillators for Wireless Sensor Networks [Program→]
 

Danishvar, M.
 
Application of Data Driven methods to Predict N2O Emission in Full-scale WWTPs [Program→]
 

Danny, P.
 
An Event-Based AutomationML Model for the Process Execution of ‘Plug-and-Produce’ Assembly Systems [Program→]
 

Dantas, D.
 
A non-intrusive approach for smart power meter [Program→]
 

David, J.
 
Leveraging Digital Twins for Assisted Learning of Flexible Manufacturing Systems [Program→]
 

De Guido, S.
 
A Genetic Algorithm Optimiser For Dynamic Product Routing In Agile Manufacturing Environment [Program→]
 

Debnath, N.
 
Extra-Functional Properties Driven Component Selection for Component based System [Program→]
 
Data Warehouse Based Analysis with Integrated Blood Donation Management System [Program→]
 

Di Orio, G.
 
Towards a Framework for Interoperable and Interconnected CPS-populated Systems for Proactive Maintenance [Program→]
 

Ding, Z.
 
Efficient Fitness Function Computation of Genetic Algorithm in Virtual Machine Placement for Greener Data Centers [Program→]
 

Diprasetya, M.
 
A Cloud-based Architecture for Condition Monitoring based on Machine Learning [Program→]
 

Dong, Q.
 
Preventing Technical Debt for Automated Production System Maintenance using Systematic Change Effort Estimation with Considering Contingent Cost [Program→]
 

Dorofeev, K.
 
An Event-Based AutomationML Model for the Process Execution of ‘Plug-and-Produce’ Assembly Systems [Program→]
 

Dorofeev, K.
 
Skill-based Engineering Approach using OPC UA Programs [Program→]
 

Drozdov, D.
 
Adapting Software Design Patterns to Develop Reusable IEC 61499 Function Block Applications [Program→]
 

Dubinin, V.
 
Implementation of distributed semaphores in IEC 61499 with consensus protocols [Program→]
 

de Sousa, M.
 
An IEC 61499 Replication for Distributed Control Applications [Program→]
 

 

E

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Ehrlich, M.
 
Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology [Program→]
 

Ehsan, M.
 
Optimizing Nodal Demand Response in the Day-Ahead Electricity Market within a Smart Grid Infrastructure [Program→]
 

Eitzinger, C.
 
A digital twin for composite parts manufacturing [Program→]
 

Engel, D.
 
Conceptual Design of an Agent-based Socio-technical Demand Response Consumer Model [Program→]
 

Escartín, J.
 
Data-driven Exploration and Process Optimization for a Milling-boring Machine [Program→]
 

Espinoza, J.
 
MPC Under IEC-61499 Using Low-Cost Devices for Oil Pipeline System [Program→]
 

Espirito-Santo, A.
 
Self-Powered Smart Sensors in the Management of Water Infrastructures [Program→]
 

Espírito-Santo, A.
 
Development of the Concept vs Prototyping: Implementation of a real scale Water-Energy Integrated System [Program→]
 

Estévez, E.
 
A Tool Suite for Automatic Generation of Modular Machine Automation Projects [Program→]
 
Supporting Product Oriented Manufacturing: a Model Driven and Agent based Approach [Program→]
 

 

F

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Fadel, G.
 
An Innovative Algorithmic Safety Strategy for Networked Electrical Drive Systems [Program→]
 

Fael, C.
 
Development of the Concept vs Prototyping: Implementation of a real scale Water-Energy Integrated System [Program→]
 

Fahimi, M.
 
Alarm Flood Analysis by Hierarchical Clustering of the Probabilistic Dependency between Alarms [Program→]
 

Fahimipirehgalin, M.
 
Estimation of Missing Values in Incomplete Industrial Process Data Sets Using ECM Algorithm [Program→]
 

Falciomi, D.
 
Data Assets for Decision Support in Multi-Stage Production Systems: Industrial Business Process Management using ADOxx [Program→]
 

Fantinel, R.
 
An Innovative Algorithmic Safety Strategy for Networked Electrical Drive Systems [Program→]
 

Farahat, A.
 
What Maintenance is Worth the Money? A Data-Driven Answer [Program→]
 

Faria, P.
 
SCADA Office Building Implementation in the Context of an Aggregator [Program→]
 
Optimization-Based Home Energy Management System Under Different Electricity Pricing Schemes [Program→]
 
Electric Water Heater Modelling for Direct Load Control Demand Response [Program→]
 

Feld, S.
 
Visual Analytics for Root Cause Analysis in Self-Organizing Industrial Systems [Program→]
 

Fernandez, R.
 
NMPC-based Visual Leader-Follower Formation Control for Wheeled Mobile Robots [Program→]
 

Ferreira, A.
 
Smart Inspection Tools Combining Multi-Agent Systems and Advanced Quality Control [Program→]
 
Implementation of a Multi-Agent System to Support ZDM Strategies in Multi-Stage Environments [Program→]
 

Ferreira, B.
 
Employment and Education in Industry 4.0 and an Analysis of the Brazilian Scenario [Program→]
 

Ferreira, L.
 
Towards a Framework for Interoperable and Interconnected CPS-populated Systems for Proactive Maintenance [Program→]
 

Ferreira, P.
 
An Event-Based AutomationML Model for the Process Execution of ‘Plug-and-Produce’ Assembly Systems [Program→]
 

Ferro, M.
 
Smart Power Meter for the IoT [Program→]
 

Fiorato, N.
 
A LSTM Neural Network applied to Mobile Robots Path Planning [Program→]
 

Fitti, M.
 
Smart measurement systems for Zero-Defect Manufacturing [Program→]
 

Fonseca Ferreira, N.
 
Robotics as multi-disciplinary learning: a summer course perspective [Program→]
 

Foresti, G.
 
An augmented reality system for technical staff training [Program→]
 

Framling, K.
 
MeDI: Measurement-based Device Identification Framework for Internet of Things [Program→]
 

Freitas, E.
 
Robotics as multi-disciplinary learning: a summer course perspective [Program→]
 

Frendo, O.
 
Charging Strategies and Implications for Corporate Electric Vehicle Fleets [Program→]
 

Freund, M.
 
Integrating Explicit Context Conditions into Model Transformations for User Interfaces [Program→]
 

Friesen, M.
 
Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology [Program→]
 

Froschauer, R.
 
ADAPT - A decision-model-based Approach for Modeling Collaborative Assembly and Manufacturing Tasks [Program→]
 
Modeling workflows for industrial robots considering human-robot-collaboration [Program→]
 

Fu, Y.
 
Chattering-free discrete-time sliding mode control with event-trigger strategy [Program→]
 

Fujimoto, Y.
 
A LSTM Neural Network applied to Mobile Robots Path Planning [Program→]
 

 

G

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

G. Costa, D.
 
Multiple Mobile Sinks in Event-based Wireless Sensor Networks Exploiting Traffic Conditions in Smart City Applications [Program→]
 

Gaertner, N.
 
Charging Strategies and Implications for Corporate Electric Vehicle Fleets [Program→]
 

Gangoiti, U.
 
Supporting Product Oriented Manufacturing: a Model Driven and Agent based Approach [Program→]
 

Gao, M.
 
Battery charging and discharging curve feature extraction based on the best u-shapelets [Program→]
 

Gao, Z.
 
Grey-box Model Identification and Fault Detection of Wind Turbines Using Artificial Neural Networks [Program→]
 
Chattering-free discrete-time sliding mode control with event-trigger strategy [Program→]
 
Modelling and Synchronization of Pulse-Coupled Non-identical Oscillators for Wireless Sensor Networks [Program→]
 

Garcia, C.
 
MPC Under IEC-61499 Using Low-Cost Devices for Oil Pipeline System [Program→]
 

Garcia, M.
 
MPC Under IEC-61499 Using Low-Cost Devices for Oil Pipeline System [Program→]
 

García Esteban, J.
 
A digitalization strategy for quality control in food industry based on Artificial Intelligence techniques [Program→]
 

Genest, O.
 
SGAM-based comparative study of interoperability challenges in European flexibility demonstrators: methodology and results [Program→]
 

Geraldes, C.
 
Implementation of a Multi-Agent System to Support ZDM Strategies in Multi-Stage Environments [Program→]
 

Gerrikagoitia, J.
 
Data-driven Exploration and Process Optimization for a Milling-boring Machine [Program→]
 

Gil-de-Castro, A.
 
An IoT Low-Cost Voltage Sag Detector [Program→]
 

Giorgini, M.
 
Visualization of AGV in Virtual Reality and Collision Detection with Large Scale Point Clouds [Program→]
 

Gitzel, R.
 
Modeling Machine Health Using Gated Recurrent Units with Entity Embeddings and K-Means Clustering [Program→]
 

Gomes, L.
 
A JSON/HTTP communication protocol to support the development of distributed cyber-physical systems [Program→]
 

González Martín, I.
 
A digitalization strategy for quality control in food industry based on Artificial Intelligence techniques [Program→]
 

González-Filgueira, G.
 
Expert system of winch in oceanographic vessels for scientific purposes [Program→]
 

Graziani, S.
 
Deep Structures for a Reformer Unit Soft Sensor [Program→]
 

Gros, I.
 
A nonlinear optimal control approach for PM Linear Synchronous Motors [Program→]
 

Gross, T.
 
A Novel Approach to DG Curtailment in Rural Distribution Networks - A Case Study of the Avacon Grid as Part of the InterFlex Field Trial [Program→]
 

Grunau, S.
 
Multi-Label Wireless Interference Classification with Convolutional Neural Networks [Program→]
 

Grüner, S.
 
An Approach to the Interconnection and Unification of State Models in Discrete Manufacturing [Program→]
 

Guan, M.
 
A Dynamic Window Approach with Collision Suppression Cone for Avoidance of Moving Obstacles [Program→]
 

Guilherme, I.
 
A multi-agent system approach for management of Industrial IoT devices in manufacturing processes [Program→]
 

Guimarães, L.
 
Overview about Autonomous Surfave Vessels: Sensors Infrastructure [Program→]
 
Automation Systems and Control for Shrimp Production Tanks [Program→]
 

Guirguis, M.
 
A Game-Theoretic Two-Stage Stochastic Programing Model to Protect CPS against Attacks [Program→]
 

Gulzar, K.
 
Automatic Generation of a Lifecycle Analysis Model from a First Principles Industrial Process Simulation Model [Program→]
 

Gupta, B.
 
Design of Very Efficient Lookup Algorithms for a Low Diameter Hierarchical Structured Peer-to-Peer Network [Program→]
 

Gupta, C.
 
What Maintenance is Worth the Money? A Data-Driven Answer [Program→]
 

 

H

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Haber, R.
 
Towards the Adoption of Cyber-Physical Systems of Systems Paradigm in Smart Manufacturing Environments [Program→]
 

Haddou Benderbal, H.
 
A hybrid multi-objective based approach for sustainable process plan generation in a reconfigurable manufacturing environment [Program→]
 

Hajibandeh, N.
 
Optimizing Nodal Demand Response in the Day-Ahead Electricity Market within a Smart Grid Infrastructure [Program→]
 

Hammer, B.
 
Generation of Adversarial Examples to Prevent Misclassification of Deep Neural Network based Condition Monitoring Systems for Cyber-Physical Production Systems [Program→]
 

Harada, K.
 
Anonymization method based on sparse coding for power usage data [Program→]
 

Harrison, R.
 
Automatic Data Representation Analysis for Reconfigurable Systems Integration [Program→]
 
Optimizing the Scheduling of Autonomous Guided Vehicle in a Manufacturing Process [Program→]
 

Hassan, H.
 
An Approach to the Interconnection and Unification of State Models in Discrete Manufacturing [Program→]
 

Hazaz, M.
 
Bandwidth improvement of Disturbance Observer with Low Pass Derivative FIR Filter [Program→]
 

He, X.
 
Deadline-aware Memory Scheduler and Governor for Heterogeneous Processors [Program→]
 

He, Z.
 
Battery charging and discharging curve feature extraction based on the best u-shapelets [Program→]
 

Heizmann, M.
 
Hybrid modeling approaches with a view to model output prediction for industrial applications [Program→]
 

Held, H.
 
Hybrid modeling approaches with a view to model output prediction for industrial applications [Program→]
 

Henkel, C.
 
Adaptive Work Instructions for People with Disabilities in the Context of Human Robot Collaboration [Program→]
 

Herbst, T.
 
Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation [Program→]
 

Hermann, G.
 
A Comparative Experimental Study of Lossless Compression Algorithms for Enhancing Energy Efficiency in Smart Meters [Program→]
 

Herrmann, C.
 
Supporting SMEs towards adopting mixed reality A training concept to bring the virtuality-reality continuum into application [Program→]
 

Hexmoor, H.
 
Design of Very Efficient Lookup Algorithms for a Low Diameter Hierarchical Structured Peer-to-Peer Network [Program→]
 

Hitado Simarro, J.
 
Supporting a Cloud Platform with Streams of Factory Shop Floor Data in the Context of the Industry 4.0 [Program→]
 

Hochreiner, C.
 
Process Simulation for Machine Reservation in Cloud Manufacturing [Program→]
 

Hochwallner, M.
 
Performance Assessment of the Integration between Industrial Agents and Low-level Automation Functions [Program→]
 

Hsieh, Y.
 
A Skill-Based Programming System for Robotic Furniture Assembly [Program→]
 

Hu, G.
 
Design of Very Efficient Lookup Algorithms for a Low Diameter Hierarchical Structured Peer-to-Peer Network [Program→]
 
Reconstructing LaTeX Source Files from Generated PDFs -- a Neural Network Approach [Program→]
 

Huang, B.
 
Load Forecasting Based on Deep Long Short-term Memory with Consideration of Costing correlated Factor [Program→]
 

Huang, P.
 
A Skill-Based Programming System for Robotic Furniture Assembly [Program→]
 

Huang, Z.
 
Application of Data Driven methods to Predict N2O Emission in Full-scale WWTPs [Program→]
 

 

I

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Iftikhar, U.
 
Supporting a Cloud Platform with Streams of Factory Shop Floor Data in the Context of the Industry 4.0 [Program→]
 
A Framework for Data Collection, Transformation and Processing in industrial Systems [Program→]
 

Ishikawa, T.
 
Scaling Adjustment Method for Motion Copying System with Environmental Variations [Program→]
 

 

J

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Jalili, M.
 
Demand Response Planning Tool using Markov Decision Process [Program→]
 

Jasperneite, J.
 
Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology [Program→]
 
Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation [Program→]
 

Jesus, T.
 
On the Computing of Area Coverage by Visual Sensor Networks: Assessing Performance of Approximate and Precise Algorithms [Program→]
 

Jiang, Z.
 
A Cloud-Based Training and Evaluation System for Facial Paralysis Rehabilitation [Program→]
 

Jirkovsky, V.
 
OPC UA Realization of Cloud Cyber-Physical System [Program→]
 

Juraschek, M.
 
Supporting SMEs towards adopting mixed reality A training concept to bring the virtuality-reality continuum into application [Program→]
 

 

K

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Kabitzsch, K.
 
Lowering Variability in Transport Times by Scheduling Conveyor-Based AMHS in Wafer Fabs [Program→]
 

Kadera, P.
 
OPC UA Realization of Cloud Cyber-Physical System [Program→]
 

Kapała, M.
 
Are IT professionals sensitive and happy leaders in Poland? [Program→]
 

Karhela, T.
 
Automatic Generation of a Lifecycle Analysis Model from a First Principles Industrial Process Simulation Model [Program→]
 

Karnouskos, S.
 
Assessing the Integration of Software Agents and Industrial Automation Systems with ISO/IEC 25010 [Program→]
 
Charging Strategies and Implications for Corporate Electric Vehicle Fleets [Program→]
 
Performance Assessment of the Integration between Industrial Agents and Low-level Automation Functions [Program→]
 

Kastner, W.
 
Context-aware optimization strategies for universal application in smart building energy management [Program→]
 

Katsou, E.
 
Application of Data Driven methods to Predict N2O Emission in Full-scale WWTPs [Program→]
 

Kawamuara, A.
 
Robust Control Strategy for AUV with Workspace Observer [Program→]
 

Kazmi, J.
 
SGAM-based comparative study of interoperability challenges in European flexibility demonstrators: methodology and results [Program→]
 

Keller, A.
 
Optimizing the Scheduling of Autonomous Guided Vehicle in a Manufacturing Process [Program→]
 

Keplinger, A.
 
Are IT professionals sensitive and happy leaders in Poland? [Program→]
 

Khorram, M.
 
Optimization-Based Home Energy Management System Under Different Electricity Pricing Schemes [Program→]
 

Kiermeier, M.
 
Monitoring Autonomous Agents in Self-Organizing Industrial Systems [Program→]
 
Visual Analytics for Root Cause Analysis in Self-Organizing Industrial Systems [Program→]
 

Kinghorst, J.
 
Alarm Flood Analysis by Hierarchical Clustering of the Probabilistic Dependency between Alarms [Program→]
 

Kinoshita, S.
 
Task Allocating Service-oriented Network for Smart Community Applications [Program→]
 

Kipouridis, O.
 
Charging Strategies and Implications for Corporate Electric Vehicle Fleets [Program→]
 

Klintworth, J.
 
A digital twin for composite parts manufacturing [Program→]
 

Kniess, J.
 
An Energy Efficient Mesh LNN Routing Protocol Based on Ant Colony Optimization [Program→]
 

Kobzan, T.
 
Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation [Program→]
 

Kopp, F.
 
Attack and Fault Detection in Process Control Communication Using Unsupervised Machine Learning [Program→]
 

Korodi, A.
 
Node-Red and OPC UA Based Lightweight and Low-Cost Historian with Application in the Water Industry [Program→]
 

Kotriwala, A.
 
Modeling Machine Health Using Gated Recurrent Units with Entity Embeddings and K-Means Clustering [Program→]
 

Kowal, J.
 
IT Project manager selection review [Program→]
 
Are IT professionals sensitive and happy leaders in Poland? [Program→]
 

Krammer, M.
 
Master for Simulation Control using the Distributed Co-Simulation Protocol [Program→]
 

Krilašević, S.
 
Identification, Model Validation and Control of an Octorotor Unmanned Aerial Vehicle [Program→]
 

Kröger, T.
 
Alarm Flood Analysis by Hierarchical Clustering of the Probabilistic Dependency between Alarms [Program→]
 

Kupzog, F.
 
SGAM-based comparative study of interoperability challenges in European flexibility demonstrators: methodology and results [Program→]
 

König, H.
 
Attack and Fault Detection in Process Control Communication Using Unsupervised Machine Learning [Program→]
 

 

L

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Ladosz, P.
 
A Genetic Algorithm Optimiser For Dynamic Product Routing In Agile Manufacturing Environment [Program→]
 

Lai, C.
 
Load Forecasting Based on Deep Long Short-term Memory with Consideration of Costing correlated Factor [Program→]
 

Lai, L.
 
Load Forecasting Based on Deep Long Short-term Memory with Consideration of Costing correlated Factor [Program→]
 

Lanas, D.
 
MPC Under IEC-61499 Using Low-Cost Devices for Oil Pipeline System [Program→]
 

Lang, D.
 
Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology [Program→]
 

Lanz, M.
 
Configurator module to integrate different protocols for IoT solution [Program→]
 
Leveraging Digital Twins for Assisted Learning of Flexible Manufacturing Systems [Program→]
 

Lehnhoff, S.
 
Conceptual Design of an Agent-based Socio-technical Demand Response Consumer Model [Program→]
 

Leitao, P.
 
Performance Assessment of the Integration between Industrial Agents and Low-level Automation Functions [Program→]
 

Leitão, P.
 
Data Scientist under the Da.Re Perspective: Analysis of Training Offers, Skills and Challenges [Program→]
 
Assessing the Integration of Software Agents and Industrial Automation Systems with ISO/IEC 25010 [Program→]
 
Smart Inspection Tools Combining Multi-Agent Systems and Advanced Quality Control [Program→]
 
Implementation of a Multi-Agent System to Support ZDM Strategies in Multi-Stage Environments [Program→]
 

Leão, E.
 
A Hybrid Beacon Scheduling Scheme to Allow the Periodic Reconfiguration of Large-scale Cluster-tree WSNs [Program→]
 
Data-Based Cluster-Tree Formation Scheme for Large-Scale Wireless Sensor Networks [Program→]
 

Li, D.
 
Deriving Customer Privacy from Randomly Perturbed Smart Metering Data [Program→]
 
An Algorithmic Method for Tampering-Proof and Privacy-Preserving Smart Metering [Program→]
 

Lima, C.
 
Self-Powered Smart Sensors in the Management of Water Infrastructures [Program→]
 

Lima, F.
 
Electricity Readers Routing Based on Clustering and Communities Detection [Program→]
 

Lindgren, P.
 
Heapless: Dynamic Data Structures without Dynamic Heap Allocator for Rust [Program→]
 
No Panic! Verification of Rust Programs by Symbolic Execution [Program→]
 

Lindner, M.
 
Heapless: Dynamic Data Structures without Dynamic Heap Allocator for Rust [Program→]
 
No Panic! Verification of Rust Programs by Symbolic Execution [Program→]
 

Lindorfer, R.
 
ADAPT - A decision-model-based Approach for Modeling Collaborative Assembly and Manufacturing Tasks [Program→]
 
Modeling workflows for industrial robots considering human-robot-collaboration [Program→]
 

Liu, Q.
 
Deriving Customer Privacy from Randomly Perturbed Smart Metering Data [Program→]
 

Liu, Y.
 
Battery charging and discharging curve feature extraction based on the best u-shapelets [Program→]
 

Lo Duca, G.
 
Smart measurement systems for Zero-Defect Manufacturing [Program→]
 
Smart Inspection Tools Combining Multi-Agent Systems and Advanced Quality Control [Program→]
 

Lobov, A.
 
An Approach to the Interconnection and Unification of State Models in Discrete Manufacturing [Program→]
 
Configurator module to integrate different protocols for IoT solution [Program→]
 
Leveraging Digital Twins for Assisted Learning of Flexible Manufacturing Systems [Program→]
 

Lohse, N.
 
An Event-Based AutomationML Model for the Process Execution of ‘Plug-and-Produce’ Assembly Systems [Program→]
 

Longhi, S.
 
A Review of Recursive Holarchies for Viable Systems in CPSs [Program→]
 

Lopes, S.
 
A mind-mapping front-end for text writing [Program→]
 

Lucas Soares, A.
 
Conceptual framework for the identification of influential contexts of the adoption decision [Program→]
 

Lucchi, D.
 
Electricity Readers Routing Based on Clustering and Communities Detection [Program→]
 

Lv, Q.
 
Deriving Customer Privacy from Randomly Perturbed Smart Metering Data [Program→]
 
An Algorithmic Method for Tampering-Proof and Privacy-Preserving Smart Metering [Program→]
 

López, M.
 
Supporting Product Oriented Manufacturing: a Model Driven and Agent based Approach [Program→]
 

 

M

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

MacDonell, S.
 
On Design-time Security in IEC 61499 Systems: Conceptualisation, Implementation, and Feasibility [Program→]
 

Maciag, R.
 
Digital transformation as the subject of discursive analysis [Program→]
 

Maddali, K.
 
Design of Very Efficient Lookup Algorithms for a Low Diameter Hierarchical Structured Peer-to-Peer Network [Program→]
 

Madhikermi, M.
 
MeDI: Measurement-based Device Identification Framework for Internet of Things [Program→]
 

Magalhães, A.
 
An IEC 61499 Replication for Distributed Control Applications [Program→]
 

Mahmoodpour, M.
 
Configurator module to integrate different protocols for IoT solution [Program→]
 

Maji, G.
 
Data Warehouse Based Analysis with Integrated Blood Donation Management System [Program→]
 

Malucelli, A.
 
Are fintechs really a hype? A machine learning-based polarity analysis of Brazilian posts on social media [Program→]
 

Maló, P.
 
Towards a Framework for Interoperable and Interconnected CPS-populated Systems for Proactive Maintenance [Program→]
 

Mansouri, S.
 
A multi-function hybrid inverter for optimal performance in multi-source renewable energy [Program→]
 

Marcos, M.
 
A Tool Suite for Automatic Generation of Modular Machine Automation Projects [Program→]
 
Supporting Product Oriented Manufacturing: a Model Driven and Agent based Approach [Program→]
 

Marignetti, F.
 
A nonlinear optimal control approach for PM Linear Synchronous Motors [Program→]
 

Marques, V.
 
An Energy Efficient Mesh LNN Routing Protocol Based on Ant Colony Optimization [Program→]
 

Marteniz Lastra, J.
 
Towards the Adoption of Cyber-Physical Systems of Systems Paradigm in Smart Manufacturing Environments [Program→]
 

Martin, C.
 
Integrating Explicit Context Conditions into Model Transformations for User Interfaces [Program→]
 

Martinez Lastra, J.
 
Supporting a Cloud Platform with Streams of Factory Shop Floor Data in the Context of the Industry 4.0 [Program→]
 
A Framework for Data Collection, Transformation and Processing in industrial Systems [Program→]
 
An ISA-95 based Ontology for Manufacturing Systems Knowledge Description Extended with Semantic Rules [Program→]
 

Martinuzzo Batista, L.
 
Electricity Readers Routing Based on Clustering and Communities Detection [Program→]
 

Martín, J.
 
Supporting Product Oriented Manufacturing: a Model Driven and Agent based Approach [Program→]
 

Matabuena, D.
 
An IoT Low-Cost Voltage Sag Detector [Program→]
 

Matos, J.
 
GO0D MAN Data Model - Interoperability in Multistage Zero Defect Manufacturing [Program→]
 

Mašić, .
 
Nonlinear Flatness-Based Decoupled Power Control of DFIG Wind Turbine System [Program→]
 

Mechin, P.
 
A digital twin for composite parts manufacturing [Program→]
 

Medina-Gracia, R.
 
An IoT Low-Cost Voltage Sag Detector [Program→]
 

Meier, U.
 
Multi-Label Wireless Interference Classification with Convolutional Neural Networks [Program→]
 

Mendes, N.
 
Flexible programming and orchestration of collaborative robotic manufacturing systems [Program→]
 

Mendling, J.
 
Process Simulation for Machine Reservation in Cloud Manufacturing [Program→]
 

Messias, G.
 
Employment and Education in Industry 4.0 and an Analysis of the Brazilian Scenario [Program→]
 

Meyer, O.
 
Industrial Internet of Things: covering standardization gaps for the next generation of reconfigurable production systems [Program→]
 

Mildt, D.
 
A Novel Approach to DG Curtailment in Rural Distribution Networks - A Case Study of the Avacon Grid as Part of the InterFlex Field Trial [Program→]
 

Minetti, E.
 
Smart measurement systems for Zero-Defect Manufacturing [Program→]
 

Mohammed, W.
 
Supporting a Cloud Platform with Streams of Factory Shop Floor Data in the Context of the Industry 4.0 [Program→]
 
A Framework for Data Collection, Transformation and Processing in industrial Systems [Program→]
 
Towards the Adoption of Cyber-Physical Systems of Systems Paradigm in Smart Manufacturing Environments [Program→]
 

Mok, A.
 
A Skill-Based Programming System for Robotic Furniture Assembly [Program→]
 

Monjardim, G.
 
A Domain-Specific Language for Fault Diagnosis in Electrical Submersible Pumps [Program→]
 

Monteiro, V.
 
Innovative Off-Board EV Home Charging Station as a Smart Home Enabler: Present and Proposed Perspectives [Program→]
 
Selective Harmonic Measurement and Compensation Using Smart Inverters in a Microgrid with Distributed Generation [Program→]
 

Montez, C.
 
Interference of IEEE 802.11n Networks upon IEEE 802.15.4-Based WBANs: An Experimental Study [Program→]
 

Montez, C.
 
A Hybrid Beacon Scheduling Scheme to Allow the Periodic Reconfiguration of Large-scale Cluster-tree WSNs [Program→]
 

Montez, C.
 
Data-Based Cluster-Tree Formation Scheme for Large-Scale Wireless Sensor Networks [Program→]
 

Monti, A.
 
Combining auto-regression with exogenous variables in sequence-to-sequence recurrent neural networks for short-term load forecasting [Program→]
 
A Novel Approach to DG Curtailment in Rural Distribution Networks - A Case Study of the Avacon Grid as Part of the InterFlex Field Trial [Program→]
 
SGAM-based comparative study of interoperability challenges in European flexibility demonstrators: methodology and results [Program→]
 

Moraes, R.
 
A Hybrid Beacon Scheduling Scheme to Allow the Periodic Reconfiguration of Large-scale Cluster-tree WSNs [Program→]
 
Data-Based Cluster-Tree Formation Scheme for Large-Scale Wireless Sensor Networks [Program→]
 
Interference of IEEE 802.11n Networks upon IEEE 802.15.4-Based WBANs: An Experimental Study [Program→]
 

Morales, A.
 
Interference of IEEE 802.11n Networks upon IEEE 802.15.4-Based WBANs: An Experimental Study [Program→]
 

Morato, A.
 
An Innovative Algorithmic Safety Strategy for Networked Electrical Drive Systems [Program→]
 

Moreno Rodilla, V.
 
A digitalization strategy for quality control in food industry based on Artificial Intelligence techniques [Program→]
 

Moreno-Munoz, A.
 
An IoT Low-Cost Voltage Sag Detector [Program→]
 

Mousavi, A.
 
Application of Data Driven methods to Predict N2O Emission in Full-scale WWTPs [Program→]
 

Murakami, T.
 
Scaling Adjustment Method for Motion Copying System with Environmental Variations [Program→]
 
Bandwidth improvement of Disturbance Observer with Low Pass Derivative FIR Filter [Program→]
 
Robust Control Strategy for AUV with Workspace Observer [Program→]
 

Mäkiö, J.
 
Are IT professionals sensitive and happy leaders in Poland? [Program→]
 

Müller, T.
 
Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation [Program→]
 

Müller, T.
 
Connecting PLCs with their Asset Administration Shell for Automatic Device Configuration [Program→]
 

 

N

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Nakamura, W.
 
Employment and Education in Industry 4.0 and an Analysis of the Brazilian Scenario [Program→]
 

Nakamura, Y.
 
Anonymization method based on sparse coding for power usage data [Program→]
 

Naticchia, B.
 
A Review of Recursive Holarchies for Viable Systems in CPSs [Program→]
 

Nedoma, P.
 
An Enhancement of the Driver Distraction Detection and Evaluation Method Based on Computational Intelligence Algorithms [Program→]
 

Neef, B.
 
Tool Wear and Surface Quality Monitoring Using High Frequency CNC Machine Tool Current Signature [Program→]
 

Neto, M.
 
A multi-agent system approach for management of Industrial IoT devices in manufacturing processes [Program→]
 

Neto, P.
 
Flexible programming and orchestration of collaborative robotic manufacturing systems [Program→]
 

Ng, C.
 
A Dynamic Window Approach with Collision Suppression Cone for Avoidance of Moving Obstacles [Program→]
 

Nicolae, A.
 
Node-Red and OPC UA Based Lightweight and Low-Cost Historian with Application in the Water Industry [Program→]
 

Niggemann, O.
 
Challenges in Learning Causal Models of Alarms in Industrial Plants [Program→]
 

Niggemann, O.
 
Generation of Adversarial Examples to Prevent Misclassification of Deep Neural Network based Condition Monitoring Systems for Cyber-Physical Production Systems [Program→]
 

Nilsson, J.
 
Semantic interoperability in Industry 4.0: Survey on Recent Developments and Outlook [Program→]
 

Nishi, H.
 
Anonymization method based on sparse coding for power usage data [Program→]
 
Request Distribution for Heterogeneous Database Server Clusters with Processing Time Estimation [Program→]
 

Nishi, H.
 
Task Allocating Service-oriented Network for Smart Community Applications [Program→]
 

Novoa, C.
 
A Game-Theoretic Two-Stage Stochastic Programing Model to Protect CPS against Attacks [Program→]
 

 

O

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

O'Halloran, B.
 
Assessing the Consequence of Cyber and Physical Malicious Attacks in Complex, Cyber-Physical Systems During Early System Design [Program→]
 

Obitko, M.
 
OPC UA Realization of Cloud Cyber-Physical System [Program→]
 

Oboe, R.
 
A LSTM Neural Network applied to Mobile Robots Path Planning [Program→]
 

Oestanto, E.
 
Development of a Mobile App for Fault Detection Assessment based on Information Fusion [Program→]
 

Ohno, Y.
 
Anonymization method based on sparse coding for power usage data [Program→]
 

Okano, T.
 
Scaling Adjustment Method for Motion Copying System with Environmental Variations [Program→]
 
Robust Control Strategy for AUV with Workspace Observer [Program→]
 

Oliveira, E.
 
Multiple Mobile Sinks in Event-based Wireless Sensor Networks Exploiting Traffic Conditions in Smart City Applications [Program→]
 

Oliveira, V.
 
Overview about Autonomous Surfave Vessels: Sensors Infrastructure [Program→]
 

Oliveira, V.
 
Automation Systems and Control for Shrimp Production Tanks [Program→]
 

Oliveira-Santos, T.
 
Electricity Readers Routing Based on Clustering and Communities Detection [Program→]
 

Omori, M.
 
Request Distribution for Heterogeneous Database Server Clusters with Processing Time Estimation [Program→]
 

Orive, D.
 
A Tool Suite for Automatic Generation of Modular Machine Automation Projects [Program→]
 

Osmanović, A.
 
Nonlinear Flatness-Based Decoupled Power Control of DFIG Wind Turbine System [Program→]
 

Osmić, N.
 
Identification, Model Validation and Control of an Octorotor Unmanned Aerial Vehicle [Program→]
 

Osório, G.
 
Robust Probabilistic Load Flow in Microgrids considering Wind Generation, Photovoltaics and Plug-in Hybrid Electric Vehicles [Program→]
 

Otto, J.
 
Generation of Adversarial Examples to Prevent Misclassification of Deep Neural Network based Condition Monitoring Systems for Cyber-Physical Production Systems [Program→]
 

Ovsiannikova, P.
 
Active learning of formal plant models for cyber-physical systems [Program→]
 

 

P

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

P. J. Peixoto, J.
 
Multiple Mobile Sinks in Event-based Wireless Sensor Networks Exploiting Traffic Conditions in Smart City Applications [Program→]
 

Paciello, V.
 
Smart Power Meter for the IoT [Program→]
 
Measuring suspension velocity from acceleration integration [Program→]
 

Paiva, A.
 
Employment and Education in Industry 4.0 and an Analysis of the Brazilian Scenario [Program→]
 

Pakonen, A.
 
Counterexample visualization and explanation for function block diagrams [Program→]
 

Pang, C.
 
Modelling Industrial Cyber-Physical Systems using IEC 61499 and OPC UA [Program→]
 

Paone, N.
 
Smart measurement systems for Zero-Defect Manufacturing [Program→]
 

Papakonstantinou, N.
 
Assessing the Consequence of Cyber and Physical Malicious Attacks in Complex, Cyber-Physical Systems During Early System Design [Program→]
 

Pareschi, D.
 
Modeling Machine Health Using Gated Recurrent Units with Entity Embeddings and K-Means Clustering [Program→]
 

Parizad, A.
 
Robust Probabilistic Load Flow in Microgrids considering Wind Generation, Photovoltaics and Plug-in Hybrid Electric Vehicles [Program→]
 

Parpinelli, R.
 
An Energy Efficient Mesh LNN Routing Protocol Based on Ant Colony Optimization [Program→]
 

Patil, S.
 
Adapting Software Design Patterns to Develop Reusable IEC 61499 Function Block Applications [Program→]
 

Paul, A.
 
Attack and Fault Detection in Process Control Communication Using Unsupervised Machine Learning [Program→]
 

Paulo, B.
 
A multi-agent system approach for management of Industrial IoT devices in manufacturing processes [Program→]
 

Pechmann, A.
 
Concept and Demonstration of a Generic Simulation to Identify Production Bottlenecks [Program→]
 

Pereira, C.
 
Model-Based Design Methodology for Early Evaluation of Real-time and Embedded Constraints [Program→]
 

Pereira, F.
 
A JSON/HTTP communication protocol to support the development of distributed cyber-physical systems [Program→]
 

Peres, R.
 
GO0D MAN Data Model - Interoperability in Multistage Zero Defect Manufacturing [Program→]
 

Petlenkov, E.
 
An Enhancement of the Driver Distraction Detection and Evaluation Method Based on Computational Intelligence Algorithms [Program→]
 

Petters, B.
 
A Novel Approach to DG Curtailment in Rural Distribution Networks - A Case Study of the Avacon Grid as Part of the InterFlex Field Trial [Program→]
 

Peña, E.
 
Hardware/Software Implementation Factors Influencing Ethernet Latency [Program→]
 

Phan, T.
 
Monitoring Autonomous Agents in Self-Organizing Industrial Systems [Program→]
 

Pichler, J.
 
Deriving a State Model of a Control Program by Symbolic Execution [Program→]
 

Piciarelli, C.
 
An augmented reality system for technical staff training [Program→]
 

Pietrosanto, A.
 
Smart Power Meter for the IoT [Program→]
 

Pietrosanto, A.
 
Measuring suspension velocity from acceleration integration [Program→]
 

Pinto, T.
 
Bridging Automation and Robotics: an Interprocess Communication between IEC 61131-3 and ROS [Program→]
 

Pirani, M.
 
A Review of Recursive Holarchies for Viable Systems in CPSs [Program→]
 

Pires, F.
 
Data Scientist under the Da.Re Perspective: Analysis of Training Offers, Skills and Challenges [Program→]
 

Portugal, P.
 
A Hybrid Beacon Scheduling Scheme to Allow the Periodic Reconfiguration of Large-scale Cluster-tree WSNs [Program→]
 
On the Computing of Area Coverage by Visual Sensor Networks: Assessing Performance of Approximate and Precise Algorithms [Program→]
 
Multiple Mobile Sinks in Event-based Wireless Sensor Networks Exploiting Traffic Conditions in Smart City Applications [Program→]
 

Posselt, G.
 
Supporting SMEs towards adopting mixed reality A training concept to bring the virtuality-reality continuum into application [Program→]
 

Prado, B.
 
A non-intrusive approach for smart power meter [Program→]
 

Prähofer, H.
 
Deriving a State Model of a Control Program by Symbolic Execution [Program→]
 

Puščul, B.
 
Identification, Model Validation and Control of an Octorotor Unmanned Aerial Vehicle [Program→]
 

Páscoa Marques, J.
 
Development of the Concept vs Prototyping: Implementation of a real scale Water-Energy Integrated System [Program→]
 

 

Q

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Queiroz, A.
 
Overview about Autonomous Surfave Vessels: Sensors Infrastructure [Program→]
 

Queiroz, J.
 
A multi-agent system approach for management of Industrial IoT devices in manufacturing processes [Program→]
 

Queiroz, J.
 
Smart Inspection Tools Combining Multi-Agent Systems and Advanced Quality Control [Program→]
 
Implementation of a Multi-Agent System to Support ZDM Strategies in Multi-Stage Environments [Program→]
 

 

R

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Rahimi, N.
 
Design of Very Efficient Lookup Algorithms for a Low Diameter Hierarchical Structured Peer-to-Peer Network [Program→]
 

Rahimi, S.
 
Design of Very Efficient Lookup Algorithms for a Low Diameter Hierarchical Structured Peer-to-Peer Network [Program→]
 

Rahimilarki, R.
 
Grey-box Model Identification and Fault Detection of Wind Turbines Using Artificial Neural Networks [Program→]
 

Ramis Ferrer, B.
 
Supporting a Cloud Platform with Streams of Factory Shop Floor Data in the Context of the Industry 4.0 [Program→]
 
A Framework for Data Collection, Transformation and Processing in industrial Systems [Program→]
 
Towards the Adoption of Cyber-Physical Systems of Systems Paradigm in Smart Manufacturing Environments [Program→]
 
An ISA-95 based Ontology for Manufacturing Systems Knowledge Description Extended with Semantic Rules [Program→]
 

Raud, Z.
 
Improving energy recovery in blended antilock braking systems of electric vehicles [Program→]
 

Rauhoeft, G.
 
Industrial Internet of Things: covering standardization gaps for the next generation of reconfigurable production systems [Program→]
 

Rech, L.
 
Interference of IEEE 802.11n Networks upon IEEE 802.15.4-Based WBANs: An Experimental Study [Program→]
 

Reese, S.
 
A Novel Approach to DG Curtailment in Rural Distribution Networks - A Case Study of the Avacon Grid as Part of the InterFlex Field Trial [Program→]
 

Rehman, K.
 
Charging Strategies and Implications for Corporate Electric Vehicle Fleets [Program→]
 

Rettberg, A.
 
Model-Based Design Methodology for Early Evaluation of Real-time and Embedded Constraints [Program→]
 

Revilla Martín, I.
 
A digitalization strategy for quality control in food industry based on Artificial Intelligence techniques [Program→]
 

Ribeiro, B.
 
Self-Powered Smart Sensors in the Management of Water Infrastructures [Program→]
 

Ribeiro, F.
 
Model-Based Design Methodology for Early Evaluation of Real-time and Embedded Constraints [Program→]
 

Ribeiro, L.
 
Assessing the Integration of Software Agents and Industrial Automation Systems with ISO/IEC 25010 [Program→]
 
Performance Assessment of the Integration between Industrial Agents and Low-level Automation Functions [Program→]
 

Ribeiro, M.
 
A Domain-Specific Language for Fault Diagnosis in Electrical Submersible Pumps [Program→]
 

Rigatos, G.
 
Condition monitoring of wind-power units using the Derivative-free nonlinear Kalman Filter [Program→]
 
A nonlinear optimal control approach for PM Linear Synchronous Motors [Program→]
 

Ristovski, K.
 
What Maintenance is Worth the Money? A Data-Driven Answer [Program→]
 

Rocha, A.
 
GO0D MAN Data Model - Interoperability in Multistage Zero Defect Manufacturing [Program→]
 

Rodrigues, A.
 
A Domain-Specific Language for Fault Diagnosis in Electrical Submersible Pumps [Program→]
 

Rodrigues, A.
 
Electricity Readers Routing Based on Clustering and Communities Detection [Program→]
 

Rodrigues, U.
 
Employment and Education in Industry 4.0 and an Analysis of the Brazilian Scenario [Program→]
 

Rokrok, E.
 
Consensus-Based Demand-Side Participation in Smart Microgrid Emergency Operation [Program→]
 

Ruland, K.
 
Overview of authentication and access control methods for I&C systems [Program→]
 

Ruusu, R.
 
Automatic Generation of a Lifecycle Analysis Model from a First Principles Industrial Process Simulation Model [Program→]
 

 

S

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Safeea, M.
 
Flexible programming and orchestration of collaborative robotic manufacturing systems [Program→]
 

Safnuk, B.
 
Reconstructing LaTeX Source Files from Generated PDFs -- a Neural Network Approach [Program→]
 

Sandin, F.
 
Semantic interoperability in Industry 4.0: Survey on Recent Developments and Outlook [Program→]
 

Santin, A.
 
Are fintechs really a hype? A machine learning-based polarity analysis of Brazilian posts on social media [Program→]
 

Santos, A.
 
An IEC 61499 Replication for Distributed Control Applications [Program→]
 

Santos, F.
 
Development of the Concept vs Prototyping: Implementation of a real scale Water-Energy Integrated System [Program→]
 

Sarkar, A.
 
Extra-Functional Properties Driven Component Selection for Component based System [Program→]
 

Sassmanhausen, Y.
 
Overview of authentication and access control methods for I&C systems [Program→]
 

Sauer, H.
 
Monitoring Autonomous Agents in Self-Organizing Industrial Systems [Program→]
 

Savic, M.
 
SGAM-based comparative study of interoperability challenges in European flexibility demonstrators: methodology and results [Program→]
 

Schachinger, D.
 
Context-aware optimization strategies for universal application in smart building energy management [Program→]
 

Schel, D.
 
Industrial Internet of Things: covering standardization gaps for the next generation of reconfigurable production systems [Program→]
 

Schmitt, J.
 
An Approach to the Interconnection and Unification of State Models in Discrete Manufacturing [Program→]
 

Schneider, M.
 
Adaptive Work Instructions for People with Disabilities in the Context of Human Robot Collaboration [Program→]
 

Schriegel, S.
 
Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation [Program→]
 

Schulte, S.
 
Process Simulation for Machine Reservation in Cloud Manufacturing [Program→]
 

Schuster, F.
 
Attack and Fault Detection in Process Control Communication Using Unsupervised Machine Learning [Program→]
 

Schwarz, G.
 
ADAPT - A decision-model-based Approach for Modeling Collaborative Assembly and Manufacturing Tasks [Program→]
 

Schwarzer, J.
 
Conceptual Design of an Agent-based Socio-technical Demand Response Consumer Model [Program→]
 

Schwenke, C.
 
Lowering Variability in Transport Times by Scheduling Conveyor-Based AMHS in Wafer Fabs [Program→]
 

Schwung, A.
 
Virtual Commissioning Approach based on the Discrete Element Method [Program→]
 
Development of a Mobile App for Fault Detection Assessment based on Information Fusion [Program→]
 
A Cloud-based Architecture for Condition Monitoring based on Machine Learning [Program→]
 

Schönberger, D.
 
Modeling workflows for industrial robots considering human-robot-collaboration [Program→]
 

Seara, M.
 
Are fintechs really a hype? A machine learning-based polarity analysis of Brazilian posts on social media [Program→]
 

Sen, S.
 
Data Warehouse Based Analysis with Integrated Blood Donation Management System [Program→]
 

Senokosov, I.
 
Implementation of distributed semaphores in IEC 61499 with consensus protocols [Program→]
 

Serita, S.
 
What Maintenance is Worth the Money? A Data-Driven Answer [Program→]
 

Serpanos, D.
 
Condition monitoring of wind-power units using the Derivative-free nonlinear Kalman Filter [Program→]
 

Seyedamir, A.
 
An ISA-95 based Ontology for Manufacturing Systems Knowledge Description Extended with Semantic Rules [Program→]
 

Shafie-khah, M.
 
Consensus-Based Demand-Side Participation in Smart Microgrid Emergency Operation [Program→]
 
Optimizing Nodal Demand Response in the Day-Ahead Electricity Market within a Smart Grid Infrastructure [Program→]
 
Robust Probabilistic Load Flow in Microgrids considering Wind Generation, Photovoltaics and Plug-in Hybrid Electric Vehicles [Program→]
 

Shalyto, A.
 
Active learning of formal plant models for cyber-physical systems [Program→]
 

Shang, L.
 
Deriving Customer Privacy from Randomly Perturbed Smart Metering Data [Program→]
 
An Algorithmic Method for Tampering-Proof and Privacy-Preserving Smart Metering [Program→]
 

Siadimas, V.
 
Condition monitoring of wind-power units using the Derivative-free nonlinear Kalman Filter [Program→]
 

Siano, P.
 
Condition monitoring of wind-power units using the Derivative-free nonlinear Kalman Filter [Program→]
 
A nonlinear optimal control approach for PM Linear Synchronous Motors [Program→]
 
Consensus-Based Demand-Side Participation in Smart Microgrid Emergency Operation [Program→]
 
Robust Probabilistic Load Flow in Microgrids considering Wind Generation, Photovoltaics and Plug-in Hybrid Electric Vehicles [Program→]
 

Siddique, K.
 
A Game-Theoretic Two-Stage Stochastic Programing Model to Protect CPS against Attacks [Program→]
 

Siedersberger, D.
 
Data-Based Cluster-Tree Formation Scheme for Large-Scale Wireless Sensor Networks [Program→]
 

Sierla, S.
 
Automatic Generation of a Lifecycle Analysis Model from a First Principles Industrial Process Simulation Model [Program→]
 

Silva, A.
 
An IEC 61499 Replication for Distributed Control Applications [Program→]
 

Silva, A.
 
Development of the Concept vs Prototyping: Implementation of a real scale Water-Energy Integrated System [Program→]
 

Silva, A.
 
Optimal sizing and technical evaluation of energy and water system based on micro-hydric solar and wind sources [Program→]
 

Sinha, R.
 
On Design-time Security in IEC 61499 Systems: Conceptualisation, Implementation, and Feasibility [Program→]
 

Sinha, R.
 
Assessing the Integration of Software Agents and Industrial Automation Systems with ISO/IEC 25010 [Program→]
 

Soares, M.
 
Model-Based Design Methodology for Early Evaluation of Real-time and Embedded Constraints [Program→]
 

Sokolowski, P.
 
Demand Response Planning Tool using Markov Decision Process [Program→]
 

Sommella, P.
 
Measuring suspension velocity from acceleration integration [Program→]
 

Song, Y.
 
Modelling Industrial Cyber-Physical Systems using IEC 61499 and OPC UA [Program→]
 

Sosale, G.
 
Modeling Machine Health Using Gated Recurrent Units with Entity Embeddings and K-Means Clustering [Program→]
 

Sousa, T.
 
Innovative Off-Board EV Home Charging Station as a Smart Home Enabler: Present and Proposed Perspectives [Program→]
 
Selective Harmonic Measurement and Compensation Using Smart Inverters in a Microgrid with Distributed Generation [Program→]
 

Souza, F.
 
Mixture of Elastic Net Experts and its application to a Polymerization Batch Process [Program→]
 

Souza, V.
 
A Domain-Specific Language for Fault Diagnosis in Electrical Submersible Pumps [Program→]
 

Specht, F.
 
Generation of Adversarial Examples to Prevent Misclassification of Deep Neural Network based Condition Monitoring Systems for Cyber-Physical Production Systems [Program→]
 

Spiegel, J.
 
A Comparative Experimental Study of Lossless Compression Algorithms for Enhancing Energy Efficiency in Smart Meters [Program→]
 

Stankevich, A.
 
Active learning of formal plant models for cyber-physical systems [Program→]
 

Steinmetz, C.
 
Model-Based Design Methodology for Early Evaluation of Real-time and Embedded Constraints [Program→]
 

Stock, D.
 
Industrial Internet of Things: covering standardization gaps for the next generation of reconfigurable production systems [Program→]
 

Strasser, T.
 
Assessing the Integration of Software Agents and Industrial Automation Systems with ISO/IEC 25010 [Program→]
 

Straś-Romanowska, M.
 
Are IT professionals sensitive and happy leaders in Poland? [Program→]
 

Stöhr, M.
 
Adaptive Work Instructions for People with Disabilities in the Context of Human Robot Collaboration [Program→]
 

Subbiah, S.
 
Modeling Machine Health Using Gated Recurrent Units with Entity Embeddings and K-Means Clustering [Program→]
 

 

T

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Tahsini, A.
 
A Game-Theoretic Two-Stage Stochastic Programing Model to Protect CPS against Attacks [Program→]
 

Tang, H.
 
What Maintenance is Worth the Money? A Data-Driven Answer [Program→]
 

Tang, M.
 
Efficient Fitness Function Computation of Genetic Algorithm in Virtual Machine Placement for Greener Data Centers [Program→]
 

Tanveer, A.
 
On Design-time Security in IEC 61499 Systems: Conceptualisation, Implementation, and Feasibility [Program→]
 

Tavares, H.
 
A non-intrusive approach for smart power meter [Program→]
 

Tellabi, A.
 
Overview of authentication and access control methods for I&C systems [Program→]
 

Thiede, S.
 
Tool Wear and Surface Quality Monitoring Using High Frequency CNC Machine Tool Current Signature [Program→]
 

Tian, Y.
 
Efficient Fitness Function Computation of Genetic Algorithm in Virtual Machine Placement for Greener Data Centers [Program→]
 

Tnani, S.
 
A multi-function hybrid inverter for optimal performance in multi-source renewable energy [Program→]
 
Optimal sizing and technical evaluation of energy and water system based on micro-hydric solar and wind sources [Program→]
 

Torales, R.
 
Overview about Autonomous Surfave Vessels: Sensors Infrastructure [Program→]
 

Touzout, F.
 
A hybrid multi-objective based approach for sustainable process plan generation in a reconfigurable manufacturing environment [Program→]
 

Tramarin, F.
 
An Innovative Algorithmic Safety Strategy for Networked Electrical Drive Systems [Program→]
 

Trindade, T.
 
NMPC-based Visual Leader-Follower Formation Control for Wheeled Mobile Robots [Program→]
 

Tsang, K.
 
Load Forecasting Based on Deep Long Short-term Memory with Consideration of Costing correlated Factor [Program→]
 

 

U

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Ulyantsev, V.
 
Active learning of formal plant models for cyber-physical systems [Program→]
 

Utz, W.
 
Data Assets for Decision Support in Multi-Stage Production Systems: Industrial Business Process Management using ADOxx [Program→]
 

 

V

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Vale, Z.
 
SCADA Office Building Implementation in the Context of an Aggregator [Program→]
 
Optimization-Based Home Energy Management System Under Different Electricity Pricing Schemes [Program→]
 
Electric Water Heater Modelling for Direct Load Control Demand Response [Program→]
 

Valentim, N.
 
Employment and Education in Industry 4.0 and an Analysis of the Brazilian Scenario [Program→]
 

Van Bossuyt, D.
 
Assessing the Consequence of Cyber and Physical Malicious Attacks in Complex, Cyber-Physical Systems During Early System Design [Program→]
 

Varejão, F.
 
Electricity Readers Routing Based on Clustering and Communities Detection [Program→]
 

Varejão, F.
 
A Domain-Specific Language for Fault Diagnosis in Electrical Submersible Pumps [Program→]
 

Vasconcelos, V.
 
A Hybrid Beacon Scheduling Scheme to Allow the Periodic Reconfiguration of Large-scale Cluster-tree WSNs [Program→]
 

Vasilaki, V.
 
Application of Data Driven methods to Predict N2O Emission in Full-scale WWTPs [Program→]
 

Vasques, F.
 
Data-Based Cluster-Tree Formation Scheme for Large-Scale Wireless Sensor Networks [Program→]
 

Veiga, G.
 
Bridging Automation and Robotics: an Interprocess Communication between IEC 61131-3 and ROS [Program→]
 

Velagić, J.
 
Nonlinear Flatness-Based Decoupled Power Control of DFIG Wind Turbine System [Program→]
 
Identification, Model Validation and Control of an Octorotor Unmanned Aerial Vehicle [Program→]
 

Vera, D.
 
Automatic Data Representation Analysis for Reconfigurable Systems Integration [Program→]
 

Vernier, M.
 
An augmented reality system for technical staff training [Program→]
 

Verzano, N.
 
Charging Strategies and Implications for Corporate Electric Vehicle Fleets [Program→]
 

Videnov, S.
 
Process Simulation for Machine Reservation in Cloud Manufacturing [Program→]
 

Villalonga, A.
 
Towards the Adoption of Cyber-Physical Systems of Systems Paradigm in Smart Manufacturing Environments [Program→]
 

Vitturi, S.
 
An Innovative Algorithmic Safety Strategy for Networked Electrical Drive Systems [Program→]
 

Vivar Quintana, A.
 
A digitalization strategy for quality control in food industry based on Artificial Intelligence techniques [Program→]
 

Vodovozov, V.
 
Improving energy recovery in blended antilock braking systems of electric vehicles [Program→]
 
An Enhancement of the Driver Distraction Detection and Evaluation Method Based on Computational Intelligence Algorithms [Program→]
 

Vogel-Heuser, B.
 
Alarm Flood Analysis by Hierarchical Clustering of the Probabilistic Dependency between Alarms [Program→]
 
Estimation of Missing Values in Incomplete Industrial Process Data Sets Using ECM Algorithm [Program→]
 
Preventing Technical Debt for Automated Production System Maintenance using Systematic Change Effort Estimation with Considering Contingent Cost [Program→]
 

Voinov, A.
 
Implementation of distributed semaphores in IEC 61499 with consensus protocols [Program→]
 

Vyatkin, V.
 
Automatic Generation of a Lifecycle Analysis Model from a First Principles Industrial Process Simulation Model [Program→]
 

Vyatkin, V.
 
Counterexample visualization and explanation for function block diagrams [Program→]
 
Implementation of distributed semaphores in IEC 61499 with consensus protocols [Program→]
 
Adapting Software Design Patterns to Develop Reusable IEC 61499 Function Block Applications [Program→]
 
Modelling Industrial Cyber-Physical Systems using IEC 61499 and OPC UA [Program→]
 
A Review on Programming Approaches for Dynamic Industrial Cyber Physical Systems [Program→]
 
Active learning of formal plant models for cyber-physical systems [Program→]
 

 

W

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Waibel, P.
 
Process Simulation for Machine Reservation in Cloud Manufacturing [Program→]
 

Wang, J.
 
Chattering-free discrete-time sliding mode control with event-trigger strategy [Program→]
 

Wang, P.
 
Modelling Industrial Cyber-Physical Systems using IEC 61499 and OPC UA [Program→]
 

Wang, Q.
 
What Maintenance is Worth the Money? A Data-Driven Answer [Program→]
 

Wang, W.
 
A Cloud-Based Training and Evaluation System for Facial Paralysis Rehabilitation [Program→]
 

Wang, W.
 
A Cloud-Based Training and Evaluation System for Facial Paralysis Rehabilitation [Program→]
 

Wei, Z.
 
A Dynamic Window Approach with Collision Suppression Cone for Avoidance of Moving Obstacles [Program→]
 

Weiß, I.
 
Alarm Flood Analysis by Hierarchical Clustering of the Probabilistic Dependency between Alarms [Program→]
 

Wen, C.
 
A Dynamic Window Approach with Collision Suppression Cone for Avoidance of Moving Obstacles [Program→]
 

Wenger, M.
 
Connecting PLCs with their Asset Administration Shell for Automatic Device Configuration [Program→]
 

Westbrink, F.
 
Virtual Commissioning Approach based on the Discrete Element Method [Program→]
 

Wiebe, F.
 
Automated Generation of a Co-Simulation-based Testing Environment for Fast-Evolving Industrial Embedded Software [Program→]
 

Wieghardt, J.
 
Monitoring Autonomous Agents in Self-Organizing Industrial Systems [Program→]
 

Wilms, H.
 
Combining auto-regression with exogenous variables in sequence-to-sequence recurrent neural networks for short-term load forecasting [Program→]
 

Wira, P.
 
A Comparative Experimental Study of Lossless Compression Algorithms for Enhancing Energy Efficiency in Smart Meters [Program→]
 

Wisniewski, L.
 
Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology [Program→]
 

Wu, D.
 
Load Forecasting Based on Deep Long Short-term Memory with Consideration of Costing correlated Factor [Program→]
 

Wunder, U.
 
Concept and Demonstration of a Generic Simulation to Identify Production Bottlenecks [Program→]
 

Wunderlich, P.
 
Challenges in Learning Causal Models of Alarms in Industrial Plants [Program→]
 

 

X

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Xibilia, M.
 
Deep Structures for a Reformer Unit Soft Sensor [Program→]
 

Xu, F.
 
Load Forecasting Based on Deep Long Short-term Memory with Consideration of Costing correlated Factor [Program→]
 

 

Y

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Yang, H.
 
A novel observer method for Markov jump systems with simultaneous sensor and actuator faults [Program→]
 

Yao, F.
 
Optimizing the Scheduling of Autonomous Guided Vehicle in a Manufacturing Process [Program→]
 

Yin, S.
 
A novel observer method for Markov jump systems with simultaneous sensor and actuator faults [Program→]
 

Yousefnezhad, N.
 
MeDI: Measurement-based Device Identification Framework for Internet of Things [Program→]
 

Yu, Z.
 
Battery charging and discharging curve feature extraction based on the best u-shapelets [Program→]
 

Yuan, H.
 
Load Forecasting Based on Deep Long Short-term Memory with Consideration of Costing correlated Factor [Program→]
 

 

Z

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Zakirzyanov, I.
 
Active learning of formal plant models for cyber-physical systems [Program→]
 

Zalasiewicz, M.
 
A Genetic Algorithm Optimiser For Dynamic Product Routing In Agile Manufacturing Environment [Program→]
 

Zambal, S.
 
A digital twin for composite parts manufacturing [Program→]
 

Zanier, M.
 
An augmented reality system for technical staff training [Program→]
 

Zarte, M.
 
Concept and Demonstration of a Generic Simulation to Identify Production Bottlenecks [Program→]
 

Zervos, N.
 
Condition monitoring of wind-power units using the Derivative-free nonlinear Kalman Filter [Program→]
 

Zhang, J.
 
Automatic Data Representation Analysis for Reconfigurable Systems Integration [Program→]
 

Zhang, Y.
 
An Algorithmic Method for Tampering-Proof and Privacy-Preserving Smart Metering [Program→]
 

Zhang, Z.
 
Modelling Industrial Cyber-Physical Systems using IEC 61499 and OPC UA [Program→]
 

Zhao, Y.
 
Deriving Customer Privacy from Randomly Perturbed Smart Metering Data [Program→]
 
An Algorithmic Method for Tampering-Proof and Privacy-Preserving Smart Metering [Program→]
 

Zhu, J.
 
Modelling and Synchronization of Pulse-Coupled Non-identical Oscillators for Wireless Sensor Networks [Program→]
 

Zoitl, A.
 
Skill-based Engineering Approach using OPC UA Programs [Program→]
 

Zoitl, A.
 
Connecting PLCs with their Asset Administration Shell for Automatic Device Configuration [Program→]
 

Zong, Y.
 
Modelling and Synchronization of Pulse-Coupled Non-identical Oscillators for Wireless Sensor Networks [Program→]
 

Zou, Y.
 
A Dynamic Window Approach with Collision Suppression Cone for Avoidance of Moving Obstacles [Program→]
 

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]